Equipment Manufactured In France - infaco Powercoup PW2 SC160 Assembly Instructions Manual

Manufacturer: : INFACO S.A.S. - 81140 CAHUZAC-SUR-VÈRE (FRANCE)
Type: : Saw SC160
Weight of POWERCOUP PW2 Saw : Modèle SC160 2100g
Max. power : 1000 W
Battery voltage : 48 Volts
This information is being given for informational purposes only. It is under no circumstances
contractual, and is subject to modification for reasons of improvement, without prior notice.
Patented equipment..
Vidéos techniques disponibles sur le site internet : www.infaco.com
The following pictograms are used in this user's manual:
Indicates a risk of bodily harm, danger of death or a risk of damage to the tool if
the instructions given in this user's manual are not followed.
Indicates the presence of electrical voltage.
Read this user's manual carefully before using the tool. Make sure that you have
understood how the tool works and is operated. Take good care of the tool in
compliance with these instructions, so that it will always function correctly. Keep
this user's manual and the attached documentation close to the tool.

EQUIPMENT MANUFACTURED IN FRANCE

Technical information or After-Sales:
INFACO S.A.S.
Bois de Roziès
81140 CAHUZAC-SUR-VÈRE (FRANCE)
Tél. : (+33)05 63 33 91 49 - Fax : (+33)05 63 33 95 57
E-mail : electrocoup@infaco.fr
27