Advertisement
Quick Links
Advertisement
Related Manuals for Adexa DF-28LD
Summary of Contents for Adexa DF-28LD
- Page 1 DF-28LD Computerized Operation Fryer User’s Manual...
-
Page 2: For Your Safety
Important: 1. You are advised to read these instructions first before installation commences. 2. This manual must be handed to the end user after installation and commissioning. Warning: Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operation and maintenance instructions thoroughly before installing or servicing this appliance. - Page 3 1. General information 1.1 Information about the instruction manual This instruction manual contains information about the installation, operation and maintenance of the appliance and should be consulted as an important source of information and reference guide. Awareness of the safety instructions and instructions for use in this manual will ensure the safe and correct use of the appliance.
- Page 4 can be undertaken. This device may only be operated in safe condition following the user’s manual. 2.2 Safety instructions for the commercial use of the device The appliance is intended for commercial use only, and should never be used for purposes other than stated above. The regional territorial provisions must be complied with.
- Page 5 . Technical data Dimension: 400(W) x800(D) x1100(H) mm Voltage: 380-415V，50/60Hz Power: 18kW Oil capacity: 28L Frying area: 400x350(mm) 5. Installation and operation 5.1 Safety instructions WARNING! Electrical hazard! The appliance should be connected to a suitable power receptacle. The outside body should be earthed properly. Never yank or pull the power cord violently to disconnect from outlet.
- Page 6 to the operator. ● Do not leave any frying goods in the basket hanging over the container with the hot oil. ● Never move or reposition the fryer until the hot oil cools down completely. WARNING! Risk of injury! Hot oil splashes and fat explosions respectively may cause burns at hands and face! ●...
- Page 7 5.3.1.5 The left display shows “SELP”( product keys), which indicates you can select any of product keys to press. All the product keys are flashing now. Press the key on which you want to programme. eg. If you want to programme on key 3, then you press number 3.
- Page 8 means oil melting process has been finished, and it begins to speed up the heating. 5.3.2.3 At the period of waiting L0 to be -----, it indicates the oil temperature is close to the setting temperature, it can begin to fry the food within 2 minutes.
- Page 9 6. Cleaning and maintenance 6.1 Safety advice Before starting repairment or cleaning works, make sure the unit has been disconnected from power socket (pull off the power plug!!!) and has cooled down completely. Do not use any acid or abrasive detergents and make sure no water runs into the internal part of the unit.
- Page 10 recommended that the replaced power cord should be the special type designated by the manufacturer. Damage may be done to the whole unit and its internal wire if the wrong type of power cord has been used for replacement. ●Only qualified electrician or personnel may perform the repair of the unit. All the necessary replaced parts have to be the types designated by the manufacturer.