Table of Contents
Advertisement
User instructions
ANNULLING A PROGRAM
To annul the program in progress, it must first be interrupted (see
"I
NTERRUPTION OF A PROGRAM
In case that the door is opened during the operation, to the next door
closing it is going to be necessary to start the program as shown in
paragraph "S
TART PROGRAM
which it was interrupted.
In case that the tub temperature is higher than 50°C the program
will start about 30 seconds later.
DELAY PROGRAM
(available in all programs except the soak program)
The PROGRAM DELAY button (3) can be pressed to delay the start of
the washing program by 3, 6 or 9 hours. This function allows you to set
the dishwasher to work at your preferred time of day.
After selecting the delay, start the program (see relative section).
The appliance will prewash the dishes, after which the "program delay"
set previously will come into effect (the light corresponding to 3, 6 or 9
hours flashes).
").
Now press buttons P1+P2 simultaneously and
the first three program lights will come on.
". The program will resume from the point in
(on some models only)
15
Advertisement
Table of Contents
