Options - Belkin OmniView User Manual

4-2 Virtual Media
6. Establish drive redirection by pressing the "Connect" button once.
If all the settings are correct, the status bar displays that the connection
has been established, the "Connect" button is disabled, and the
"Disconnect" button is enabled. In the event of an error, the status line
shows the error message.
The drive-redirection software tries to lock the local drive before it is
redirected. This prevents the local operating system from accessing the drive
as long as it is redirected. The attempt will fail if a file on the drive is currently
open. In the case of a locking failure, you will be prompted to confirm that
you wish to establish the connection. However, remember that if write
support is enabled, drive redirection could damage a drive that is not locked.
7. Use the "Disconnect" button to stop a drive redirection after the process
has started.
8. Click "Exit" to shut down the drive-redirection program. If a drive-redirection
connection is active, the connection will close before the application
terminates.
9. Use the "Hide to Tray" button to minimize the application without terminating
it completely. An active connection will remain until you close the application.
You can access the software by double-clicking on its tray icon. The tray
icon also indicates whether or not a connection is established. Right-click on
it to access a submenu.

Options

Disable Drive Redirection
This switches off drive redirection.
Force Read-Only Connections
This switches off write support for drive redirection.
Click "Apply" to submit your changes.
Menu Options
1
2
3
4
5
6
40