Stroke Input Method - Nokia N86 8MP User Manual

When you do not need the predictive list or you
could not find your desired Chinese character in the
predictive list, while the predictive list is not
activated, you could directly input the Pinyin for
next Chinese character. While the predictive list is
already activated, you have to press the right
selection key to close the predictive list first and
then continue to input the Pinyin for the next
Chinese character.
Pinyin input example: To input
characters for "Pinyin"
1. Enter into the text editing window for writing a text
message or any other possible position for
inputting Chinese character, and switch to Pinyin
input mode.
2. Input the Pinyin letter pin for "pin": press 7, 4, 6 in
sequence, and finally input * once for the 1st tone.
3. Scroll right to highlight pin- and then press the
scroll key to activate the candidate list.
4. The character for "pin" will be shown in the
candidate list. If this character locates in the first
highlighted position of the candidate list, you could
directly press the scroll key to input it, otherwise,
you should first scroll right to highlight this
character and then press the scroll key to input it.
5. After you input the character for "pin", the
50
predictive list will be shown, and the character for
Cyan Cyan Cyan Cyan
"yin" is shown in the predictive list. You could use
the same method described in item 4 to input this
character.

Stroke input method

The strokes are classified according to the following
table.
Use Stroke input method
1. Input strokes: The strokes constituting Chinese
characters have been divided into five categories:
Horizontal, Vertical, Left-falling, Dot and Turning.
Magenta Magenta Magenta Magenta Yellow Yellow Yellow Yellow Black Black Black Black