General - Asus RT-G32 User Manual

Broad range wireless family router

Hide thumbs Also See for RT-G32:

Table of Contents

General

This page allows user to configure basic wireless settings.

SSID: Assign an identification string of up to 32 characters for your wireless connection.

Hide SSID: If [YES] is selected, your SSID does not show in site surveys by wireless mobile

clients and they can only connect to your ASUS Wireless Router with your SSID of AP.

Channel: The radio channel for wireless connection operation.

Wireless Mode: This field indicates the 802.11g interface mode. Select [Auto] to allow the

connection to the ASUS Wireless Router of 802.11g and 802.11b wireless mobile clients.

Select [54g]to maximize performance, but disconnect 802.11b clients. Select [54g Protection]

to enable G-Mode protection for 802.11g traffic automatically in the presence of 11b traffic.

Authentication Method: This field enables the authentication methods for wireless clients.

WPA Encryption: Enable WPA Encryption to encrypt data.

WPA Pre-Shared Key: This field requires a password of 8 to 63 characters to start the

encryption process. If you leave this field blank, the default [00000000] will be assigned as

your password.

WEP Encryption: Enable WEP Encryption to encrypt data.

Key Index: Set the WEP key to transmit data on your wireless.

WEP Key 1~4: Only valid when using WEP encryption algorithm. The key must match with the

AP's Key.

ASUS Passphrase: Select [WEP-64bits] or [WEP-128bits] in WEP encryption field to

Table of Contents