Bluetooth - Gallagher HR5 Instructions Manual

3E3183 Gallagher HR5 Hand Held EID Tag Reader User Manual

Bluetooth

The HR5 Reader is Bluetooth enabled, able to be searched for and
connected to, by other devices (Discoverable), or perform a search
to ini ate the connec on itself. Only one Bluetooth device can be
connected to the reader, at any me.
Bluetooth Setup
1. From the Main Menu screen, use the arrow keys to select the
Bluetooth icon
2. Use the le or right arrow key to select
The connec on status and device table will
be displayed and the connec on status will
be in 'Discoverable' mode.
3. The Reader is now able to be searched for
and found by other devices (Discoverable).
The status of the current connec on is
displayed on the screen.
4. To ini ate a connec on from the HR5.
Reader, press the
This will search for new Bluetooth devices
in range. As the name of each device is
received it will be displayed, replacing the
Bluetooth address.
Notes:
The table will be empty if no devices have
previously been found. Any previously
connected devices will be displayed in
parentheses. e.g. '(W810)'
5. Use the arrow keys to select a device
to connect to and press the
The connec on status will change to
Connec ng...
Addi onal informa on can be viewed by
pressing the
selected from the list.
Return
6. Press
menu.
Important: You may be prompted for a pass-code to
complete the Bluetooth pairing.
and press
Search
so key.
OK
Info
so key once a device is
key to save se ngs and return to the Main
OK
.
On
.
bu on.
15