Gallagher HR5 Instructions Manual page 10

3E3183 Gallagher HR5 Hand Held EID Tag Reader User Manual
How to start a new session
1. From the Main Menu screen select the Session icon
press OK.
2. On the Session Menu, select
• The session name is automa cally
created based on the current date and
an alphanumeric character.
3. To assign traits add/or a sort list to the
session, use the arrow keys to select Yes if
required for either op on.
4. Press the
session setup.
5. If Yes was selected for Record Traits, a list
of traits available will be displayed.
• Use the arrow keys to select the
required trait and press the
so key.
• Repeat, to select up to 3 traits for the
session.
• The order of the selected traits will be
displayed as a number to the right of
the trait.
• Press the
• If desired, a default value can be assigned to a trait by
using the arrow keys to scroll through the op ons. This will
automa cally be applied to the animal once scanned but
can be changed from the Read Tags screen during scanning.
• Press the
6. If Yes was selected for Sort by List, a table
of available sort lists will be displayed.
• Use the arrow keys to select the
required sort list, and press the
so key.
Note: Traits and sort lists are loaded to the
reader via APS. Please refer to the APS User
Guide for further informa on.
7. The screen will display your session setup
summary. Press the
and begin reading tags.
Note: Naviga ng away from the new session screen when trying to
create a new session, will result in the session being cancelled.
10
Next
so key to proceed to
Next
so key.
Next
so key.
Done
New Session
Select
Next
so key to confi rm session op ons
and
OK
and press .