Se Ngs - Gallagher HR5 Instructions Manual

3E3183 Gallagher HR5 Hand Held EID Tag Reader User Manual

Se ngs

The Se ngs screen is accessed directly from the Main Menu screen
and is a quick way to turn func ons On and Off using the arrow keys.
Se ng Op ons
Backlight On* (5 minutes)
Off
Cont. Read Off *
On
Read Timer On*
Off
Vibrator On*
Off
Beeper On*
Off
Time 10:03 AM
Date Y-M-D*, M-D-Y,
D-M-Y.
Zone NZL - NZST*
*Default se ngs
Changing Se ngs
1. Use the up and down arrows to scroll to
each func on to select it.
2. Use the le and right arrows to turn the
func on
3. For the Time and Date fi elds, select the
fi eld and press
to select the correct me and date.
4. Press the Return key to save changes and return to Main menu.
Note: APS can be used to alter advanced me-out se ngs. Refer to
the APS User Guide - Device Setup for further details.
14
Descrip on
Controls the backlight of the Reader. Time-
out period can be confi gured via APS.
Reader stops transmi ng once a single tag
is read.
Reader con nues to transmit following tag
read, allowing mul ple tags to be read.
Determines me allowed for transmi ng
a tag read: Con nuous Read - 5 minutes*
Non-Con nuous Read - 5 seconds*
Time-out period can be confi gured via APS.
Unlimited read me. Time-out will occur
with power off me-out
A successful tag read is confi rmed with a
vibra on in the handle.
A single beep can be heard a er a successful
Electronic ID tag read.
Two beeps can be heard on a duplicate tag
read.
The current me is displayed. Select and
press OK to change the me.
Select and press OK to set the date format
and date. Time and Date are used to create
Session names.
Indicates the me zone. Select and press OK
to change country zone and set me and
date automa cally.
On Off
or .
OK
. Use the fi eld arrows