Connect Settings - Zte -C R200 User Manual

Your phone can offer various Ringers for your selection.
Select preloaded, recorded, other rings for:
Voice Calls: Select ring for voice call.
Messages Calls: Select ring for voice mail/MMS/SMS/push message and reminder.
Sound >Keypad
Set phone beep sound or not when you press keys.
Select an option:
•
Tone: Select the utter tone level.
DTMF Length: Select the fixed- length when press keys.
Volume
Sound >
You can adjust the volume of ringer, earpiece and key beep.
Select Ringer Volume (When earphone is inserted, it is the volume of earphone Ringer), Earpiece
•
Volume or Key Beep Volume.
Press Left/ Right key to adjust volume. Press OK key to confirm.
•
Sound >Power On/Off
On: Set the phone in silence or ring when you power on the phone.
Off: Set the phone in silence or ring when you power off the phone.
Sound >Alerts
You can select alert type for an incoming call, earpiece and message.
Select an option in lists：
•
Service Change: Alert when the network service changes.
Minute Beep: Alert every minute during conversation.
Call Connect: Alert when call is connected successfully.
Call Lost: Alert when miss a call.
No Service: Alert when there is no service.
Low Battery: Alert when the phone is in state of low battery.

Connect settings

In standby mode, select Left soft key [Menu] > Settings.
Select Bluetooth to activate and set Bluetooth function.
Select GPS to activate and set GPS function.
Select Airplane Mode On/OFF to deactivate/activate airplane mode.
32 Confidential and Proprietary Information of ZTE CORPORATION
ZTE-C S200 User Manual