Motorola ASTRO APX User Manual Supplement page 13

There are two methods to program a
channel within a zone. Either:
• Select the zone and channel
through the radio interface, and then
initiate the FPP feature.
OR
• Initiate the FPP feature, and then
select the zone and channel (see
the procedure starting on the next
page).
Note: When any of the Rx parameters
(i.e., Rx frequency, Rx PL, Rx
DPL, and Rx NAC) is changed,
FPP automatically copies these
Rx parameter values to the
equivalent Direct operation (also
known as Talkaround operation)
parameters.
APX - FPP SUPPLEMENT 5