Maintenance Instructions; Maintaining The Water Tank Base; Maintaining The Humidifier Base - Philips DreamStation Go Instructions For Use Manual

Heated humidifier
Hide thumbs Also See for DreamStation Go:
Table of Contents

Advertisement

6.

Maintenance instructions

Warning
Allow the humidifier heater plate and water to cool down for approximately 15 minutes before removing the
water tank. A burn may result from: touching the heater plate, coming in contact with the heated water, or
touching the tank pan.

Maintaining the water tank base

If you use tap water in your humidifier water tank, follow the steps below to maintain the tank base. Perform these
steps monthly or more frequently, as needed.
1.
Remove the water tank from the humidifier.
2. Remove the lid from the water tank.
3. Wipe the inside of the tank base with a damp cloth to remove any debris.
4. Fill the tank base with undiluted white vinegar (5% acetic acid) and soak for a minimum of four hours or until the
tank base is visually clear of mineral build up.
5. Empty the vinegar from the tank base.
6. Thoroughly rinse the tank base with water.
7.
Inspect the tank base for any damage and replace it if necessary.

Maintaining the humidifier base

Perform these steps bi-weekly or more frequently, as needed.
1.
Remove the water tank from the humidifier.
2. Disconnect the humidifier from the therapy device.
3. Wipe the humidifier base and heater plate with a damp cloth. Allow the platform to air dry before reconnecting to
the therapy device.
4. Inspect the humidifier base for any damage and replace it if necessary.
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents