Table of Contents
Advertisement
INSTALLING AND REPLACING BATTERIES
Installing Batteries
1.
Press down and lift the battery cover in the direction of the arrow
as shown in the illustration to open the battery compartment.
2.
Install or replace 4 AA 1.5 Volt batteries in the battery compartment
according to the battery direction indicator molded on the inside of
the compartment.
3.
Replace the battery cover by inserting the bottom tabs first, then pushing
in the top clip of the battery door until it engages.
Battery Replacement
Make sure BP700W has entered into sleep mode ( Bluetooth icon
1.
disappear)You can directly enter into sleep model
1- Press the button of "Mode" and choose " PC " mode.
The letters of "PC" will blink on the LCD
2- Press the button of "Adjust" for few seconds then the Bluetooth icon will disappear
2.
It will allow you to replace the batteries in 18 seconds and the measurement
you saved in the device will not be vanished. This function provide
user enough time to install new batteries.
AFTER USE CLEANING
1.
Do not use an alcohol-based solvent or
cleaing agent to clean the device.
2.
Clean the device with a soft, dry cloth.
3.
The cuff can be cleaned using
a moist cloth and soap.
4.
Do not immerse the device or cuff in
water.
5.
Do not bend the cuff or sleeve, and do not
wrap the sleeve inside-out.
6.
Do not dismantle the device,
disconnect the cuff or try to repair the unit by
yourself. If you have a problem, contact
the distributor.
7.
Do not operate the unit
under conditions of extreme
temperature or humidity, or direct
sunshine.
8.
Do not shake the unit violently.
Storage
1. If you do not plan to use the device for an
extended period, remove the batteries
from the battery housing for storage.
Bluetooth icon will disappear once you enter sleep mode
11
：
Advertisement
Table of Contents
