SECTION 2
INSTALLING PRINTER
SECTION 2 – Installing Printer
Contents of Packaging
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Before using Printer:
Unpack Printer and verify package contents Printer
Choose a location for the Printer
Install Ink Drip Tray Assembly and assemble Printer
Plug in Printer and connect it to computer
Install Printer Driver
Install Ink Tanks
Install Printhead
Set up feed on Printer
Unpack and Set-up
Remove Printer and its parts from carton. Remove all packing tape. Find screws that attach various parts of
Guides to Printer are under tape in their respective mounting positions.
Choose a Location
Place Printer on a sturdy level worktable or cabinet at least 9" from any
walls. Open the Ink Tank Door and raise the Clamshell Assembly. Use the Bubble
Gauge mounted on the Ink Station Frame (or a small level) placed on the Ink
Station Frame to make sure Printer is level. Protect Printer from excessive heat,
dust, and moisture. Avoid placing it in direct sunlight.
6
S1 Printer
Ink Drip Tray Assembly
(Includes High and Low Ink Drip Grates)
Five Ink Tanks – Cyan, Magenta, Yellow, Black, Black
Printhead Cartridge
Media Side Guides: Registration (Left) and Adjustable
(Mounting screws attached to Printer)
Rear Media Support Guide Assembly
(Thumbscrew and mounting screws attached to Printer)
Media Support Wedges: Narrow and Wide
(Attach to slots in Rear Media Support Guide)
AC Power Cord
USB Cable
Operator Manual
Driver Software CD