Sonnen sonnenProtect 2500 Installation Instructions Manual
For sonnenbatterie hybrid 9.53. for authorised electricians
Hide thumbs
Also See for sonnenProtect 2500:
- Operating instructions for operators (20 pages) ,
- Operating instructions manual (20 pages) ,
- Installation instructions manual (28 pages)
Related Manuals for Sonnen sonnenProtect 2500
Summary of Contents for Sonnen sonnenProtect 2500
- Page 1 Installation instructions | for authorised electricians sonnenProtect 2500 for sonnenBatterie hybrid 9.53 KD-535 • Part no. 1000050 • Version X00 info@sonnen.de • sonnen.de...
- Page 2 „ Read this documentation carefully before installation / operation. „ Retain this document for reference purposes. Publisher sonnen GmbH Am Riedbach 1 D-87499 Wildpoldsried Service number +49 8304 92933 444 Email info@sonnen.de Document Document number Part number 1000050 Version Valid for Publication date 25/09/2018 Installation instructions sonnenProtect 2500...
-
Page 3: Table Of Contents
Table of contents Table of contents 1 Information about this document...................... 5 Target group of this document .................... 5 Designations in this document .................... 5 1.3 Explanation of symbols........................ 5 2 Safety................................ 6 Intended use............................ 6 2.2 Requirements for the electrician.................... 6 2.3 Operating the product ........................ - Page 4 Table of contents 8 Uninstallation and disposal ........................ 23 8.1 Uninstallation............................ 23 8.2 Disposal .............................. 23 9 Troubleshooting............................ 24 Installation instructions sonnenProtect 2500...
-
Page 5: Information About This Document
Information about this document | 1 1 Information about this document This document describes the installation of the sonnenProtect 2500 in connection with the sonnenBatterie hybrid 9.53 storage system. „ Read this document in its entirety. „ Keep this document in the vicinity of the sonnenBatterie. -
Page 6: Safety
The sonnenProtect 2500 is an emergency power unit designed to supplement the sonnenBatterie hybrid 9.53. The sonnenProtect- in conjunction with the appropriate stor- age system of the sonnen GmbH - serves to supply power in the event of a power failure. Any other use is considered improper use. -
Page 7: Product Modifications Or Changes To The Product Environment
Safety | 2 have been trained to safely use the device and understand the resulting risks of doing so. Children must not play with the device. Cleaning and user maintenance must not be car- ried out by children without supervision. 2.4 Product modifications or changes to the product environment •... -
Page 8: Product Description
-5 °C ... 45 °C Max. rel. humidity 90 %, non-condensing Permissible installation altitude 2,000 m above sea level Additional ambient conditions The ambient conditions prescribed for the stor- age system apply. Table 2: Technical data 8 / 28 Installation instructions sonnenProtect 2500... -
Page 9: System Components Of The Sonnenprotect
Product description | 3 3.2 System components of the sonnenProtect Test Illustration 1: System components of the sonnenProtect sonnenProtect Line to emergency circuit Line from storage system Residual current device (F4.P) Line from electrical distributor Miniature circuit breaker (F3.P) 3.3 Type plate The type plate is located on the outer surface of the sonnenProtect. -
Page 10: Storage And Transport
Observe the documentation. The documentation contains safety in- formation. 3.5 Storage and transport Storage and transport conditions are defined in the product documentation of the storage system. „ Observe the same storage and transport conditions for the sonnenProtect. 10 / 28 Installation instructions sonnenProtect 2500... -
Page 11: Mounting
Mounting | 4 4 Mounting 4.1 Scope of delivery „ Check the following scope of delivery to ensure it is complete. Test sonnenProtect incl. connection cables (each about 4.75 m) Safety label Installation and operating instructions Miniature circuit breaker B20 4.2 Additional parts required „... -
Page 12: Selecting The Installation Location
„ Drill the holes shown in red in the illustration on the left. „ Secure the sonnenProtect using appropriate fastening material. Illustration 3: Drill template for sonnenProtect (figure is not to scale - all specifications are in millimetres) 12 / 28 Installation instructions sonnenProtect 2500... -
Page 13: Electrical Installation
Electrical installation | 5 5 Electrical installation DANGER Electrical work on the storage system and electrical distributor Danger to life due to electrocution! „ Switch off the storage system to electrically isolate it. „ Disconnect the relevant electrical circuits. „ Secure against anyone switching on the device again. „... -
Page 14: Installing The Emergency Circuit(S)
• All components within the emergency power authorised part must be clearly identified by lettering (or graphic symbols). „ At any time observe further local and national requirements and guidelines regarding emergency power supply! 14 / 28 Installation instructions sonnenProtect 2500... -
Page 15: Positioning Components In The Electrical Distributor
Electrical installation | 5 When undertaking electrical work on the distributor in the building, the following must be taken into account, among other things: How is the wiring set up to the desired backup consumers? – Is independent wiring already in place? –... - Page 16 Transformer interface consumption (A2) Earth connection Current transformer for consumption - L1 Storage system Current transformer for consumption - L2 Storage system MCB Current transformer for consumption - L3 Public electrical mains Miniature Circuit Breaker 16 / 28 Installation instructions sonnenProtect 2500...
- Page 17 Electrical installation | 5 L1 L2 L3 N PE L N PE L N PE 1 2 3 A1 A2 N L1 L2 L3 kWh 3~ L1 L2 L3 N PE Illustration 5: Circuit diagram overview - electrical connection at three-phase mains Consumers in building RCD | Type B | 30 mA Consumers in emergency circuit...
-
Page 18: Connecting Earthing Cable To Storage System
„ Connect the earthing cable to the main earthing terminal of the building. 5.5 Connecting sonnenProtect to storage system „ Connect the line of the sonnenProtect to the socket of the storage system (2) using the pre-mounted plug (1). Illustration 7: Connecting sonnneProtect and storage system 18 / 28 Installation instructions sonnenProtect 2500... -
Page 19: Attaching Safety Label To The Distributor
Electrical installation | 5 5.6 Attaching safety label to the distributor DANGER Electrical installation remains live in event of grid outage Danger to life due to electrocution! To warn electricians: „ Attach the safety label shown below (included in scope of delivery) to the relevant electrical distributor. -
Page 20: Commissioning
ü The storage system is connected to the router of the home network. ü Your laptop or PC also accesses the home network. „ Navigate to the following internet address: https://find-my.sonnen-batterie.com „ Start the commissioning assistant 2.0. „ Run through the commissioning assistant and activate the sonnenProtect at the appro- priate point. -
Page 21: Testing Emergency Operation
If the emergency operation does not work: „ Check the electrical wiring (see Electrical installation [P. 13]). „ Contact sonnen customer service if the problem cannot be resolved. KD-535 | 1000050 | EN | X00 21 / 28... -
Page 22: Decommissioning
3. Take steps to ensure that these switches cannot be switched on again. 4. Wait at least five minutes until the internally stored energy inside the storage system inverter has discharged. Carefully check that there is no voltage inside the sonnenProtect. 22 / 28 Installation instructions sonnenProtect 2500... -
Page 23: Uninstallation And Disposal
Uninstallation and disposal | 8 8 Uninstallation and disposal 8.1 Uninstallation DANGER Improper uninstallation of the sonnenProtect Danger to life due to electrocution! „ The sonnenProtect must only be uninstalled by authorised electricians. 8.2 Disposal The sonnenProtect must not be disposed of as do- mestic waste! „... -
Page 24: Troubleshooting
Only connect electrical consumers to the emergency circuit when they have a power consumption that does not exceed the nominal power or (when switching on) the maximum power of the sonnenProtect. 24 / 28 Installation instructions sonnenProtect 2500... - Page 25 Troubleshooting | 9 Fault Possible causes Rectification Emergency operation (grid outage) - Emergency operation stops Emergency operation stops. The The batteries of the storage system If the PV system generates electrical miniature circuit breaker and the have discharged so much that further power, the emergency operation will con- RCD in the sonnenProtect have discharging would lead to a deep dis-...
- Page 28 GmbH Am Riedbach 1 D-87499 Wildpoldsried...