Denon DL-103R Operating Instructions

DL-103 Stereo Cartridge
R

Operating Instructions

Thank you for your purchase of the DENON DL-103
Read these Operating Instructions carefully before using your DL-103
future reference.
Accessories
Stylus cleaning brush .................................1
Operating instructions ................................1
Before Using
1. The Stylus is very delicate. Applying excessive force to the stylus, such as pressing with a
finger can break it. Handle the cartridge with the utmost care.
2. A powerful magnet is used in the cartridge. Note that carelessly bringing a steel screwdriver
or other such item near the cartridge will result in it being attracted by the magnet and may
result in damage to the stylus, so care must be taken. Be sure to use the stylus cover when
mounting the cartridge in the head shell, or when otherwise handling the cartridge.
Method of Use
1. Mounting to the Head Shell
• Adjust to the stylus position specified for
the turntable system you, are using and
mount properly without tilting or turning
it. (See Figure 1.)
• The output terminals are color coded for
identification as illustrated in Figure 2.
Match the colors of the head shell leads
to the terminals and connect properly.
NOTE:
When connecting the cartridge, be sure
to use the tipped leads and press them
onto the terminals. Applying heat to the
output terminals of the cartridge, such
as in direct soldering, will cause internal
damage to the cartridge, such as wire
breakage.
DL-103
stereo cartridge.
R
Data sheet .................................................1
Figure 1. Mounting to the Head Shell
Stylus position
Figure 2. Configuration of the Output Terminals
Left channel
Ground (blue)
Left channel
Hot (white)
and keep it for
R
Right channel
Ground (green)
E E
L R
L R Right channel
Hot (red)
R