Call Hold, Call Waiting, Multi-Party Call - Sagem RT1000 User Manual

SAGEM RT1000 User Manual
_________

6.9 Call Hold, Call Waiting, Multi-Party Call

If Call Waiting function enabled (see section 7.6.3), please operate as explained
below.
During a call with correspondent B, if an other correspondent C is calling you, the
phone number of C will appear on the screen under B number .
You have fouroptions:
1. Press OK key, and press 0 key: to continue dialog with B and to reject call from C.
2. Press OK key, and press 1 key: to end the call with B and to start the talk with C.
3. Press OK key, and press 2 key: to put call with B on hold, and to start the talk with
C. You can repeat this step (OK key + 2 key) to switch again the talk with B and to put
call with C on hold.
4. Press OK key, and press 3 key: to talk to B and C at the same time (if conference
call is supported by the network and included in your subscription).
26