Incoming Calls - Sagem RT1000 User Manual

SAGEM RT1000 User Manual
_________
You can call again the last dialed number by pressing on Redial key.
When the calling party has answered successfully, the screen will show the duration
of the call. At the end of the call, just put down the handset, that's all.
Hands-free mode
Press the Hands- free key; after you hearing dialing tone, the next steps are the
same as in handset mode.
If you want to switch from hands-free mode to handset mode, you need only to pick
up the handset and continue the call as in handset mode.
Note: after you have switched to handset mode, you cannot switch again to hand-free
mode.
The SAGEM RT1000 doesn't support switch from handset mode to hand-free mode.

6.3 Incoming calls

When someone call you, your phone will ring, and the screen will display the phone
number of the calling party (if supported by the network). If you wish to answer,
please pick up the handset or press the Hands-free key, then you can talk with the
calling party.
As for outgoing calls, the screen displays the duration of the call.
Reject of an incoming call
If you want to reject an incoming call, you have only to press OK key.
24