Table of Contents
Advertisement
D
Put back slowly the guide of the microSD memory
card slot and lock it.
E
Attach the battery pack cover.
• Insert a microSD memory card with the right side up in the appropriate
direction.
Inserting a microSD memory card forcefully into the slot could result in
failure to remove the microSD memory card or damage to the microSD
memory card or the IS14SH.
• Do not insert the microSD memory card too deeply when attaching it.
Charging the Battery Pack
The battery pack is not fully charged at the time of purchase. Charge
the battery pack when you use the IS14SH for the first time or the
battery level becomes low. Charging is finished when the red
charging/incoming indicator goes out.
The usage times are as follows.
Continuous stand-by
time
Continuous talk time
* These times are based on the case when the IS14SH is used in Japan.
• The IS14SH and battery pack may become warm during charging but this is
not a malfunction.
• Charging the IS14SH while using the camera function etc. may lengthen the
charging time.
• If you perform various operations with a specified charger (sold separately)
connected to the IS14SH, charging/battery level consumptions may take
place in a short time. Frequently charging the battery pack shortens its
service life.
16
®
Approx. 310 hours (while Wi-Fi
used)
®
Approx. 160 hours (while Wi-Fi
Approx. 400 min
• If the charging/incoming indicator of the IS14SH flashes in red, check
whether the battery pack is properly attached, an external device is
properly connected to the cell phone, etc. If the cell phone flashes even
after you have checked that, stop recharging the cell phone and please
contact an au shop or Customer Service Center.
• Properly close the external connection jack cover. Also, do not pull it
forcibly or twist it.
• Each of the continuous talk time and continuous stand-by time is an
average usage time combining the time during which a cell phone is carried
around by a user and properly receives radio waves plus the time during
which a cell phone is stationary and properly receives radio waves.
According to usage conditions such as battery level status and
temperature, the signal strength in a place where the cell phone is used,
settings of functions, etc., the usage times may be reduced to less than half
under the following cases.
• A cell phone is frequently used in a place where
indicator) appears on it.
®
• The Wi-Fi
function, Bluetooth
1Seg function, location information, etc. is used.
• A cell phone is set not to enable the sleep mode because of an
application etc.
is not
• Applications which remain activated in the background are used.
• If you stop charging while the charging/incoming indicator still illuminates
is used)
during charging, the cell phone may be left not fully charged even if
appears on it. In such case, the average usage times shorten.
(out of service area
®
function, mail function, camera function,
Advertisement
Table of Contents
