Inserting Microsd Memory Card - Aquos Phone IS Series Basic Manual

D
Attach the battery pack cover.
• Do not touch the terminal part of microSD memory card.
• Do not remove the microSD memory card forcefully. It may result in damage
to the microSD memory card or the IS14SH or data loss.
• Application installed to microSD memory card cannot be used once you
removed microSD memory card.
• The microSD memory card may be warm after a long time use. It is normal.

Inserting microSD Memory Card

Turn off the power and remove the battery pack cover before inserting
the microSD memory card.
• Follow the steps below to insert a microSD memory card. If you
insert it forcefully, the terminal at the back of it may be damaged and
the IS14SH may not recognize the microSD memory card.
A
Unlock the guide of the microSD memory card slot.
Guide
With the terminal
at the back in sight.
B
Raise the guide of the microSD memory card slot for
approximately 90 degrees, confirm the direction of
the terminal side of the microSD memory card and
insert it slowly.
C
Slide the guide of the microSD memory card slot until
you can see the terminal at the back of it.
Terminal
side
15