Table of Contents
Advertisement
Quick Links
Thank you for purchasing our Stat Clean No. F-6R.
Read this instruction manual before use. Keep it in a safe handy place for future reference.
Table of Contents
■For Your Safety ·························· P.2
■Product Features ························ P.3
■Production Specifications ············· P.4
■External View····························· P.5
■Performance ······························ P.6
■Installation ································ P.6
■Before Use ································ P.8
■Operation ·································· P.9
■Maintenance ······························ P.10
■Troubleshooting ························· P.14
■Storage ···································· P.15
■Warranty ································· P.16
Instruction Manual
17
Advertisement
Table of Contents
Related Manuals for Vessel F-6RL-E
Summary of Contents for Vessel F-6RL-E
-
Page 1: Table Of Contents
Instruction Manual Thank you for purchasing our Stat Clean No. F-6R. Read this instruction manual before use. Keep it in a safe handy place for future reference. Table of Contents ■For Your Safety ·························· P.2 ■Product Features ························ P.3 ■Production Specifications ············· P.4 ■External View·····························... -
Page 2: For Your Safety
●Safety precautions in this instruction manual are categorized into two types by the degree of danger associated with each of the followings. Based on danger analyses performed by Vessel, all recautions in this instruction manual are of the CAUTION level. -
Page 3: Product Features
Product Features ■AC-TYPE CORONA DISCHARGE This static eraser works by AC corona discharge, therefore longer interbal of ion balance calibration is needed and ion balance is harder to disturbe by accumulating dust on the electrode needle. This static eraser outputs high frequency voltage, therefore ion loss caused by ion recombination is low and ion can effectively be generated. - Page 4 Product Specifications Eraser Model : No.F-6R ( F-6RST-E with Stand / F-6RCL-E with Clip ) Ion generation method : High voltage AC corona discharge Output voltage : AC 3.5 kＶ Input voltage : DC 24 V ± 5 % 210 ｍA ( typ.) Dimensions : H 131 x W 77 x D 81 mm (not including stand nor clip ) Weight...
-
Page 5: External View
External View External View AD24-ITF6... -
Page 6: Performance
Performance Static Electricity Removal Capacity Measurements conforming to ANSI/EOS3.1, CPM:TREK model 581, Temperature:25℃, Humidity:50% The values above are the measurements but NOT the guaranteed performance. 50mm 100mm 150mm 200mm 250mm 300mm -0.4 -0.7 -0.7 -7.1 -7.8 -2.6 >200 52.8 24.8 10.0 10.3... -
Page 7: Installation
Installation CAUTIONS IN INSTALLATION Use only the included power supply adapter. Use of other adapters may REMEMBER results in fire, electric shock and static electricity removal trouble. REMEMBER Install F-6R securely. F-6R can be damaged or malfunctioned if it falls. Install F-6R based on below stated environment. -
Page 8: Before Use
Installation 3. To be installed by the clip (F-6RCL-E) The attached clip is for temporary installation. Vibration and other factors may change the direction of the fan blow or cause the unit to fall. The clip cannot be used for objects whose thickness is more than 40mm. -
Page 9: Operation
Before Use Connector connection Insert the included special AC adapter connector into the jack on the back of the body. Power Supply Adapter Use the power adapter (AD24-ITF6) which is specifically designed for use of F-6R. The AC adapter plug is a 3-pronged plug. Connect this to a power outlet that has a ground terminal. -
Page 10: Maintenance
Operation To be installed to automated machinery (remote operation) The operation can be switched on/off by controlling the power input if the power switch on the unit is kept on. ＋ When an external power supply is used DC24V Without use of Attached AC adapter, Power supply ±5% －... - Page 11 Maintenance Cleaning / replacement of the electrode needle unit (Louver and needles) After using long hours, dust adhered around the electrode wires. Dust adhesion can lower the performance of ionizing. Clean the electrode needles after every 100-hour operation. Before cleaning the front guard, shut OFF power and unplug the power supply transformer from the electrical outlet.
-
Page 13: Troubleshooting
Adjustment Because ions are generated with AC output, the SDJ-08 does not have an adjustment feature of ion balancing. If ion balance is not good, contact Vessel. Troubleshooting Using F-6R when in anything but proper working condition can cause product damage or personal accident. -
Page 14: Storage
Storage CAUTION STORAGE Do not store F-6R in the following places. Adverse environments can cause product breakdown. * Where exposed to vibrations or shock * Where temperature and humidity are outside specified ranges * Where dewing occurs PROHIBITED * Where temperature fluctuates sharply * Where there is the possibility of ignition or explosion of flammable solvents, dust, etc. - Page 15 Memo...
-
Page 16: Warranty
VESSEL receives notice during the warranty period. Defective products must be returned to VESSEL Osaka Japan with proof of purchase date. And if your unit is out of warranty, VESSEL will quote repair charges necessary to ship your unit freight prepaid to where you have originally purchased.
Need help?
Do you have a question about the F-6RL-E and is the answer not in the manual?
Questions and answers