jcb S1530E Operator's Manual page 110

Display Description
87 Up limit switch fault
90 Over 90% load warning
99 Over 99% load warning
OL Overloaded platform fault
LL Machine tilted beyond Safe
limits fault
LF Up/down control fault
(1) If any of the codes persist, connect the JCB ServiceMaster to fault find. Contact your JCB Dealer if required.
If the machine reports and error on the display while driving with platform raised, lower the platform and move
the machine to a smooth firm level surface. For more information, please contact your local JCB dealer.
In the event of an overload alarm 'OL', remove the excess load from the platform. Machine will not raise or
lower until load is reduced.
102
Lift Reaction
Warning only
Warning only
Warning only
Disables all motion
Disables lifting and driving
Warning only
9831/3200-3
Technical Data
Fault-Finding
Operator Instructions
Contact JCB Dealer
Reduce weight from the plat-
form
Reduce weight from the plat-
form
Reduce weight from the plat-
form, machine will not move till
load reduced.
Check the ground level
Restart the machine
102