Connecting The Console To The Smb Cat5 Kvm Switch - Belkin OmniView F1DP104Aea User Manual

Installation

Connecting the Console to the SMB CAT5 KVM Switch

Step 1
Connect the VGA monitor cable to the HDDB15 female port on the
back of the SMB CAT5 KVM Switch in the "Console" section. (Refer to
diagram below.)
Step 2
Connect the PS/2 keyboard cable to the keyboard port on the back of the
SMB CAT5 KVM Switch in the "Console" section. (Refer to diagram below.)
1
2
3
4
5
6
7
8
15