Software Configuration; Setting Up Ip Address - GDC PMA-1000 Installation Manual

4. SOFTWARE CONFIGURATION

4. Software Configuration

4.1 Setting up IP Address

The default IP address for the PMA-1000 is 192.168.3.201. To change the IP, the laptop network port must
first be modified to that of the PMA network port, then connected directly to the PMA with a LAN cable. Run
the IP configuration software (IP & MAC Config V2.1.1.exe) on the laptop, click 'Advanced', followed by
'Search', the current IP address of the PMA-1000 will be shown, as well as the current IP of the laptop. Only
when both IPs are on the same network port, the IP of the PMA will appear in black, otherwise it will appear
in grey, which implies the inaccessibility to the IP modification main interface.
Laptop IP Address
PMA-1000 IP Address
Enter the IP address of the PMA-1000 in the 'IP address' field and leave the 'Password' field blank. Click
'OK' to enter the IP modification page. After accessing to the page, first modify the gateway address, click
'Update' to save. Then modify the IP address, and click 'Update' to save. The program will return back to the
login interface. Click 'Advanced', followed by 'Search', users can verify if the IP address has been modified
successfully.
PMA-1000 Power Management Adapter -18- Aug 2015
Installation Manual