SMC Networks SMC2455W User Manual page 22

Note: The SMC2455W is DHCP-enabled by default. If you do not
know the IP address that was assigned by your DHCP
server, please use the Windows Utility or look at your
DHCP client list to get the correct IP address to use. If you
do not have a DHCP server on your network, then the
SMC2455W will auto-assign itself an IP address of:
192.168.2.50.
3. Log into the Web-based Utility. The factory default password
for he SMC2455W is "default" , all lower-case.
4. Once logged into the Web-based Utility, you can:
• Configure wireless settings and TCP/IP settings
• Configure wireless security (WEP)
• Configure MAC address filtering
• Change administrator password
• View connection status and access point information
• Reset/Restore Wireless Access Point
• Upgrade Firmware
19