Option Buttons - Dometic WDCVL Installation & Operating Instructions Manual

OPERATING INSTRUCTIONS
● Heavy Duty: The Heavy Duty wash is for heavy
material and has the option of Wash+Dry, .
● Bulky/Large: The Bulky/Large wash is for
materials that are bulky with the cycle running
approximately 1 hour and 30 minutes.
● Duvet: The Duvet wash is designed for wash-
ing duvet.
● Sport: This cycle helps wash heavily soiled
fabric with higher prewash and main wash
temperatures. Its has the option of Wash+Dry.
● Spin Only: This is a separate spin cycle. All
water will be drained before this cycle begins.
● Rinse & Spin: Select this cycle to rinse and
spin a load separately from a regular cycle.
This can be helpful in preventing fresh stains
from setting into fabrics.
● Tub Clean: (Self-Cleaning Function): NOTE:
Do NOT use this setting to wash fabrics. Do
NOT add detergent or fabric softener when us-
ing this cycle. This cycle is specially designed
to clean the appliance's drum and tubes. It
uses an extremely high temperature to steril-
ize and maintain the proper functioning of the
appliance. Adding a small amount of oxidizing
bleach to the cycle will increase the cleaning
effect. Use this cycle on a monthly basis to
keep the inside of the appliance clean.
● Quick: This cycle is ideal for quickly launder-
ing small loads. It comes with the option of
Wash+Dry.
● Delicate: This cycle is ideal for silk fabrics and
similar delicate materials.
● Sanitize: This cycle is specially designed to
sanitize clothes with high water temperatures.
It does NOT drain water, it needs to be com-
bine with another wash function to complete
the wash cycle.
● Wool: This cycle is ideal for wool fabrics
labeled "Machine Wash". Select the proper
temperature as indicated by the fabric's care
label. NOTE: Proper detergent MUST be used
when laundering wool fabrics.
● Under Wear: This cycle is ideal for laundering
under garments. It has an additional rise cycle.
● Refresh: During this cycle, hot air is pumped
into the drum to remove wrinkles and restore
freshness to fabrics. It can be used to dry fab-
rics collectively weighing less than 1.1 lbs (0.5
kg), such as a damp shirt or a pair of shorts.
● Dry: This is for drying only. The dry time can
be selected based on load size up to load limit
specifi ed on Table 1 on page 11.
● My Cycle: Press "Spin" for 3 seconds to load
the cycle and options you are currently using to
the "my cycle" program. Selecting this program
in the future will load the cycle for quick use.
C.

Option Buttons

Note: To select the desired option, press the button
until setting shows on the screen.
● Time Save: This function can decrease the
wash time.
● Delay: The delay function can be set between
0-24 hours. The start light will illuminate to
indicate the delay time. It will start the cycle
after the selected delay time has elapsed.
To Active:
I. Select program cycle.
II. Press delay button to choose time.
III. Press Start/Pause to active Delay option.
To cancel:
I. Press the Delay button until the display
shows 0H. It should be pressed before
activating the program.
II. If the program as already started, press
the On/Off button.
● Temp.: Press this button until desired setting
is lit. Available options will vary based on wash
cycle selected.
● Spin Speed: The appliance drum spins at up to
1200 rpm. This reduces drying time and saves
energy. Press the "Spin Speed" button until
the indicator light for the desired setting is lit.
Delicate fabrics require a slower spin speed.
● Soil level: This option is divided into three
levels. Choosing the right soil level increases
the appliance's effi ciency.
● Dry Level: Press this button to select the
cycle's temperature based on load size. There
are three levels available.
● Child Lock: Press the "Soil" and "Dry level"
buttons at the same time to lock/unlock the
control panel.
13