Parts Assembly; Battery Pack; Remove The Battery And Engine; Re_Attach The Battery Pack And Engine - Recon JET Owner's Manual

Parts Assembly

Your Jet smart glass comes as a pre-assembled unit. Here we show you how to safely detach (reverse these steps to
assemble) Jet's components - in case of engine, frame, lens, nose piece or battery replacement.
WARNING: Always be careful when removing Jet's engine or battery in order to avoid permanent damage to the
frame or components of your device.

BATTERY PACK

REMOVE THE ENGINE AND BATTERY
RE-ATTACH THE ENGINE AND BATTERY PACK
1- Hold the engine or battery with one hand and the frame with the other hand.
2- Line up the guttering featured on the engine or battery of Jet with the lip on the smart glass frame.
3- Gently rotate the release lever into its place on Jet's frame and snap the module into the frame.
1-Gently push the release lever forward with your thumb.
2-Then, with the release lever pushed forward, rotate the battery or engine
inward to release either the engine or battery of your Jet.
WARNING: Removing Jet's engine or battery while the device is ON or
CHARGING may damage the components/device permanently.
.
4