HIKVISION DS-2CC5112P(N) User Manual page 6

User Manual of Dome Camera
Safety Instruction
These instructions are intended to ensure that user can use the product correctly to avoid danger or
property loss.
The precaution measure is divided into "Warnings" and "Cautions"
Warnings: Serious injury or death may occur if any of the warnings are neglected.
Cautions: Injury or equipment damage may occur if any of the cautions are neglected.
Warnings Follow these safeguards to
prevent serious injury or death.
Warnings
1. In the use of the product, you must be in strict compliance with the electrical safety regulations
of the nation and region.
2. Input voltage should meet both the SELV(Safety Extra Low Voltage) and the Limited Power
Source with AC 24V or DC 12V according to the IEC60950-1 standard. Please refer to technical
specifications for detailed information.
3. Do not connect several devices to one power adapter as adapter overload may cause
over-heating or a fire hazard.
4. Please make sure that the plug is firmly connected to the power socket.
5. When the product is mounted on wall or ceiling, the device shall be firmly fixed.
6. If smoke, odor or noise rise from the device, turn off the power at once and unplug the power
cable, and then please contact the service center.
7. If the product does not work properly, please contact your dealer or the nearest service center.
Never attempt to disassemble the camera yourself. (We shall not assume any responsibility for
problems caused by unauthorized repair or maintenance.)
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Cautions Follow
precautions
potential injury or material
damage.
these
to prevent
5