Initial Network Configuration - Belkin F1DE101G User Manual

Initial Network Configuration

1. Using a RJ45 crossover cable, connect one end to the computer and the
other end to the port labeled "Network".
2. Set the IP address on your computer to be in the same range as 1.2.3.4
(example: 1.2.3.6).
3. Open the Microsoft® Internet Explorer web browser.
4. Enter the IP address "1.2.3.4".
5. Enter the default login name "administrator".
6. Enter the default password "belkin".
INSTALLATION
Serial 02
power
Serial 01
LAN
reset
11
console CPU/KVM