Advanced Setup - SMC Networks Barricade SMC7004VWBR V.2 User Manual

Configuring the Wireless Barricade Router

Advanced Setup

Use the Web management interface to define system
parameters, manage and control the Wireless Barricade and its
ports, or monitor network conditions. The following table outlines
the selections available from this program.
Menu
System
WAN
LAN
Wireless
NAT
Firewall
DDNS
UPnP
Tools
36
Description
Sets the local time zone, the password for administrator access,
and the IP address of a PC that will be allowed to manage the
Wireless Barricade remotely.
Specifies the Internet connection type:
• Dynamic IP host configuration and the physical MAC address
of each media interface
• PPPoE configuration
• PPTP
• Static IP and ISP gateway address
• BigPond (Internet service available in Australia)
• Specifies DNS servers to use for domain name resolution.
Sets the TCP/IP configuration of the Wireless Barricade's LAN
interface and all DHCP clients.
Configures the radio frequency, SSID, and encryption for
wireless communications.
Shares a single ISP account with multiple users, sets up virtual
servers.
Configures a variety of security and specialized functions,
including: Access Control, Hacker Prevention, and DMZ.
Dynamic DNS provides users on the Internet with a method to
tie their domain name(s) to computers or servers.
With Universal Plug and Play, a device can automatically
dynamically join a network, obtain an IP address, communicate
its capabilities, and learn about the presence and capabilities of
other devices. Devices can then directly communicate with each
other. This further enables peer to peer networking.
Contains options to backup & restore the current configuration,
restore all configuration settings to the factory defaults, update
system firmware, or reset the system.