Omron SYSMAC-XR005 User Manual page 42

Backup_E3NW
Expansion
Error code
error code
16#1804 SDO Abort
*1
Code
16#1808 16#00000000
*1. An SDO abort code is shown here. Refer to SDO Abort Codes in the instructions reference manual for a list of SDO abort
codes.
Sample Programming
Precautions for Correct Use
• The sample programming shows only the portion of a program that uses the function or func-
tion block from the library.
• When using actual devices, also program safety circuits, device interlocks, I/O with other
devices, and other control procedures.
• Create a user program that will produce the intended device operation.
• Check the user program for proper execution before you use it for actual operation.
This is an example of programming for backing up and then restoring parameters for the E3NW Unit at
node address 1.
Conditions
• The backup file is created in the TestDir directory.
• The backup file is write-protected (default).
• The timeout time is 2 s (default).
Backup Processing
1
Make sure that the target slave is in a state that allows communications, that SD Memory Card
Ready Flag is TRUE, and that SD Memory Card Write Protected Flag is FALSE (not write pro-
tected). Also confirm that the same instance is not being executed and that parameters are not
being restored to the same node.
2
Execute BACKUP_E3NW_instance.
Restore Processing
1
Make sure that the target slave is in a state that allows communications, that SD Memory Card
Ready Flag is TRUE, that the same instance is not being executed, and that parameters are not
being backed up from the same node.
2
Execute RESTORE_E3NW_instance.
40
Status
SDO Abort Error The cause of this error
depends on the specifications
of the EtherCAT slave.
Communica- More than 32 EtherCAT com-
tions Resource munications instructions were
Overflow executed at the same time.
Sysmac Library User's Manual for EtherCAT N-Smart Series Library (W549)
Description
Refer to the manual for the Eth-
erCAT slave and correct the
problem.
Correct the user program so
that no more than 32 EtherCAT
communicat16#1ions instruc-
tions are executed at the same
time.
Correction