Chapter 2 Hardware Installation; Panel Layout - SMC Networks Barricade User Manual

2.1. Panel Layout

2.1.1. Front Panel
1 - 4
LAN port socket (RJ-45). These are where you will connect to devices on your
local area network. (adapter, hub, or switch, e.g.)
2.1.2. Rear Panel
PRINT
WAN
COM

Chapter 2 Hardware Installation

Figure 2-1 Front Panel
Figure 2-2 Rear Panel
Parallel port connector (25-pins D-type female). This is where you
connect the shared printer.
WAN port socket (RJ -45). This is where you connect to your Cable or
DSL modem or an Ethernet router.
Serial port connector (9-pins D-type male). This is where you connect
your 56K modem. (This port is also a console port.)
-6-