Power AirFryer Pro Elite TXG-DT10L Owner's Manual page 11

Using the Accessories
Placing Round Basket into Unit
NOTE: Allow the Unit to cool for a few minutes or use
protective gloves when opening the door.
1. Open the door of the Unit. Slide the Round Basket
onto the rails in the center of the Unit.
2. Slide the switch on the left side of the Unit to the
right and hold the switch in place while pushing the
Round Basket as far back into the Unit as possible
(FIG. J).
3. Release the switch. The switch should slide back
into the left position, and the left side of the Round
Basket should be locked in place.
Removing Round Basket
from Unit
NOTE: Allow the Unit to cool for a few minutes or use
protective gloves when opening the door.
1. Open the Unit's door.
2. While wearing oven mitts, hold the switch on the left
side of the Unit in the release position.
3. Using the Fetch Tool, hook the bottom of the left
and right sides of the shaft attached to the Round
Basket (FIG. K).
4. Pull the Round Basket slightly toward you. Release
the switch.
5. Carefully remove the Round Basket from the Unit.
Removing Glass for Clean Up
NOTE: Allow the Unit to cool for a few minutes or use
protective gloves when opening the door.
1. Open the door of the Unit.
2. Push the button on the bottom side of the door to
push the glass through the top of the door.
3. Grab the tab at the top of the glass and carefully
remove the glass from the door (FIG. L).
NOTE: Some accessories may not be included
with purchase.
FIG. J
FIG. K
FIG. L
Power AirFryer Pro Elite™ | Model: TXG-DT10L
11