Advertisement
COD. SU7GOBIO/1.0
GOBIO
FINGERPRINT PROGRAMMING
First enter in configuration mode.
Pass the fingerprint to programme 5 times.
The equipment will remain in configuration mode.
This process must be repeated for all the desired fingerprints to programme.
The first channel selected will be used by default channel.
All the programmed fingerprints will be MASTER FINGERPRINTS by default. For the NOT MASTER FINGER-PRINTS
programming, see clause MASTER FINGERPRINTS / NOT MASTER FINGER-PRINTS CONFIGURATION.
Note: If a fingerprint reading is not ok, the orange led will flash and two jeeps will be heard.
MASTER FINGERPRINT / NOT MASTER FINGERPRINT CONFIGURATION
Being in configuration mode, the device must be configured as follows:
Once the device is configured, for the desired fingerprint programming follow the clause
4
Advertisement
