Summary of Contents for JCM Technologies GO-BIO
- Page 1 COD. SU7GOBIO/1.0 GOBIO BIOMETRIC TRANSMITTER FOR OPERATING WITH MOTION RECEIVERS. More information in www.jcm-tech.com...
-
Page 2: Technical Data
COD. SU7GOBIO/1.0 GOBIO STARTING UP TECHNICAL DATA Operating frequency 868,35 MHz Power supply 1,5Vdc (1 battery type AAA) Consumption operating / standby 200mA / 40uA Radiated power < 2,52uW Memory Maximum 10 fingerprints Operating temperature -20ºC to + 55ºC Dimensions 76x41x15mm Battery duration (approx) 1,5 years (with lithium battery) -
Page 3: Configuration Mode
COD. SU7GOBIO/1.0 GOBIO TERMINOLOGY Default channel: the channel that will be send in biometric activation operating Authorised channels: The authorised pushbuttons for each of the finger-prints, available in the pushbutton activation + biometric validation operating Master fingerprint: fingerprint that allows using operating and configuration modes Not master fingerprint: fingerprint that only allows using the operating mode LIGHT AND SOUND INDICATORS Action... - Page 4 COD. SU7GOBIO/1.0 GOBIO FINGERPRINT PROGRAMMING First enter in configuration mode. Pass the fingerprint to programme 5 times. The equipment will remain in configuration mode. This process must be repeated for all the desired fingerprints to programme. The first channel selected will be used by default channel. All the programmed fingerprints will be MASTER FINGERPRINTS by default.
-
Page 5: Erasing The Memory
COD. SU7GOBIO/1.0 GOBIO ERASING THE MEMORY To erase the memory, the device must be in configuration mode. A) ERASING ONE FINGERPRINT B) TOTAL RESET Keep pressed pushbuttons and a serial of fast beeps will be heared, indicating that the memory has been totally erased. -
Page 6: Low Battery Indicator
COD. SU7GOBIO/1.0 GOBIO The default-programmed channel will be sending for the fingerprint used. B) PUSHBUTTON ACTIVATION + BIOMETRIC VALIDATION OPERATING: C) NORMAL TRANSMITTER OPERATING If there are not fingerprints programmed in the device, this will operates as a normal transmitter pressing any of the buttons. -
Page 7: Ce Declaration Of Conformity
For avoiding a bigger consumption of the biometric reader, keep always the protective cover closed when it is not used. JCM TECHNOLOGIES, S.A. declares herewith that the product SU7GOBIO, complies with the requirements of the 1999/5/ CEE R&TTE Directive, insofar as the product is used correctly This device complies with Part 15 of the FCC Rules.