Utility Configuration - SMC Networks EZ Connect SMC2602W User Manual

7 | Utility Configuration

When the utility program is running, there will be a quick launch icon in the lower right-hand
corner of the taskbar. The icon will be GREEN if you have a good connection to a wireless
network. If it is red, you will need to verify the network settings and check to be sure that the
Wireless Access Point on your network is turned on. You may also need to re-position the Access
Point and place it in a higher position so that you are able to gain more wireless signal strength.
Double-click the quick launch icon in the system tray to bring up the Configuration Utility. This
provides quick access to management statistics and adapter settings.
The Configuration Utility includes the following tabs:
Configuration: Allows you to implement Profile Management, edit SSID data, change the Tx
Rate and Operating mode, and enable 64/128-bit WEP.
Link Information: Allows you to view/monitor network status, throughput, wireless channel,
and TCP/IP Information.
IP Information: Displays TCP/IP data and allows you to Release and Renew your IP addresses.
Site Survey: Displays all the Access Points within range of the wireless adapter's signal. Allows
you to select your desired WLAN.
Version Information: Shows the driver and utility version information.