Table of Contents
Advertisement
You have now completed the utility installation process. Click [Finish] to exit the wizard.
Step 6: Please shut down your machine. Then insert your SMC2536W-AG into the PC Card socket of
the SMC2512W-AG PCI Card and boot up the operating system.
Utility Configuration
When the utility program is running, there will be a quick launch icon in the lower right-hand corner of
the taskbar. The icon will be GREEN if you have a good connection to a wireless network. If it is red,
you will need to verify the network settings and check to be sure that the Wireless Access Point on
your network is turned on. You may also need to re-position the Access Point and place it in a higher
position so that you are able to gain more wireless signal strength.
Double-click the quick launch icon in the system tray to bring up the Configuration Utility. This pro-
vides quick access to management statistics and adapter settings.
The Configuration Utility includes the following tabs:
Profile Management: Allows you to implement Profile Management, edit SSID data, change the Tx
Rate and Operating mode, and enable 64/128/152-bit WEP or advanced security such as LEAP,
PEAP, TLS, or TTLS.
23
Advertisement
Table of Contents
