Appendix - SMC Networks SMC EZ Connect Wireless Print Server with USB Port SMCWPS-G User Manual

54mps wireless print server with usb port

Table of Contents

Appendix:

Diagnostic Mode (Wireless)

If you have no the twisted-pair cable to configure print server and have problems to configure

it on wireless network. Please refer to the following steps:

1. Change the print server to diagnostic mode by switching the DIP switch to DIAG mode.

2. Change your wireless adapter to Ad-hoc mode, and the ESSID: WLAN-PS; Channel: 6

3. Run PSAdmin to discover the print server.

4. Select the wireless print server

5. Select wireless and input the ESSID, Channel, Rates that meet your network

environment, then press ok.

Table of Contents

Do you have a question about the SMC EZ Connect Wireless Print Server with USB Port SMCWPS-G and is the answer not in the manual?

Smcwps-g Wps-g Ez connect smcwps-g