Table of Contents
Advertisement
3. Wait for the transfer successful message.
4. Done.
Upgrading the print server from UNIX (Through TCP/IP)
1. Log in as root
2. Ensure binary file is located in your current working directory.
3. Type "tftp <print server's IP address>".
4. At tftp prompt, type "get upgrade".
5. Change to binary mode.
6. At tftp prompt, type "put mpsXX.bin".
7. Wait for the file transfer to complete.
8. Quit from tftp.
9. Done.
Upgrading the print server from Browser
1.
Ensure binary file is located in your current working directory.
2.
Enter the IP address of the print server as the URL.
3.
Click Misc, and then choose Upgrade From Browser, it then as shown in the following
picture.
4.
Click Browse... and select the firmware file.
68
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the SMC EZ Connect Wireless Print Server with USB Port SMCWPS-G and is the answer not in the manual?