Table of Contents
Advertisement
6. Network Print Monitor
Preparation
The print server supports TCP/IP, IPX/SPX and NetBEUI protocols under Windows
95/98/Me. Please make sure that the following steps have been completed before
proceeding with installation under Windows PC.
Select A Desired Protocol
TCP/IP
The TCP/IP Protocol must be installed. For further information, please read "TCP/IP
Protocol Installation" section in this chapter.
Note: If TCP/IP protocol is chosen, please refer to "Assigning an IP Address to the print
server" section later in this chapter.
IPX/SPX
The IPX/SPX-compatible Protocol must be installed. For further information, please read
"IPX/SPX-compatible Protocol Installation" section in this chapter.
NetBEUI
The NetBEUI protocol must be installed. For further information, please read "NetBEUI
Protocol Installation" section in this chapter.
51
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the SMC EZ Connect Wireless Print Server with USB Port SMCWPS-G and is the answer not in the manual?