Lan Access; Introduction; Access A Local Area Network (Lan) - SMC Networks SMC EZ Connect Wireless Bluetooth USB Adapter SMCBT-EDR User Manual

Wireless bluetooth usb adapter
Table of Contents

Advertisement

SMC Networks - IVT BlueSoleil™ User Manual
7

LAN Access

7.1

Introduction

The Bluetooth LAN Access Profile (LAP) allows Bluetooth-enabled devices to access the
services of a LAN using Point-to-Point Protocol. In this usage model, multiple data
terminals use a LAN access point as a wireless connection to a Local Area Network (LAN).
Once connected, data terminals operate as if they are connected to the LAN via dial-up
networking and can access all the services provided by the LAN.
The LAN application can be used in the following scenarios:
A computer (or PDA) accesses a Local Area Network via a LAP Server.
A computer (or PDA) accesses a Local Area Network via a LAN access point.
Note: Before using the LAN Access Profile in Windows98/Me, ensure that a Dial-up
Adapter and Windows's component direct cable are already installed on the computer.
(See "Section Error! Reference source not found.: Error! Reference source not
found."). Moreover, every operating system should have an installation of NetBEUI
protocol; otherwise, it cannot use computer name to visit other computer.
7.2

Access a Local Area Network (LAN)

This section outlines the steps involved in connecting to a Local Area Network using the
LAP application.
Computer A:
Notebook/ Laptop, PIII, 800MHz, 128M
A Bluetooth USB dongle
Windows 2000
IVT BlueSoleil™
Step 1:
Insert Bluetooth USB dongles into both computers.
Step 2:
Start BlueSoleil™ in both computers.
Step 3:
Set the device name of each computer to anything you want. Here
they are named Computer A and Computer B.
Step 4:
Set the security level to Low on both Computer A and Computer B.
(Use the Tools | Configurations | Security menu).
Step 5:
Start the LAP service on Computer A.
In the BlueSoleil™ Main Window of Computer A, click Tools |
My Bluetooth Device. Enter 'Computer A' in the device name
field in the My Bluetooth Device window.
Repeat for Computer B.
In the Service Window, right-click the LAN Access icon. Select
Start Service on the pop-up menu (Figure 7.1).
Computer B:
Desktop, PIII, 600MHz, 128M
A Bluetooth USB dongle
Windows 2000
IVT BlueSoleil™
40

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smcbt-edrBt-edrEz connect smcbt-edr

Table of Contents