Buffalo CD400 Instruction Manual page 2

UK
Safety Tips
• Position on a flat, stable surface.
• A service agent/qualified technician should carry out
installation and any repairs if required. Do not remove any
components on this product.
• Consult Local and National Standards to comply with the
following:
- Health and Safety at Work Legislation
- BS EN Codes of Practice
- Fire Precautions
- IEE Wiring Regulations
- Building Regulations
• DO NOT feed meat in to the appliance by hand. ALWAYS use
the pusher supplied.
• DO NOT use fingers to clear the exit hole while the appliance
is turned on.
• DO NOT allow the motor to work against a blockage for any
length of time.
• DO NOT immerse in water.
• Only use original BUFFALO parts and attachments with this
appliance.
• Always carry the appliance by the motor housing.
• Not suitable for outdoor use.
• Keep all packaging away from children. Dispose of the
packaging in accordance to the regulations of local authorities.
• If the power cord is damaged, it must be replaced by a
BUFFALO agent or a recommended qualified technician in
order to avoid a hazard.
• BUFFALO recommend that this appliance is PAT tested on an
annual basis to ensure the product remains safe.
Introduction
Please take a few moments to carefully read through this manual. Correct maintenance and operation of
this machine will provide the best possible performance from your BUFFALO product.
2
CD400_ML_A5_v3_20180521.indb 2 2018/5/21 13:25