Yeti Cycles SB6C Owner's Manual page 4

THE LOWDOWN ON THE
SB6 AND ITS FEATURES.
C
1. SWITCH INFINITY TECHNOLOGY PATENTED SUSPENSION SYSTEM
2. HIGH MODULUS CARBON FIBER MAIN FRAME AND SWING ARM
3. OVERSIZED PIVOT PINS WITH ENDURO MAX BEARINGS
4. INTEGRATED ISCG 05 MOUNTS
5. TAPERED INSET HEAD TUBE (44MM/56MM)
6. SUSPENSION BY FOX (8.5 X 2.5)
7. CUSTOM CHAIN-SLAP GUARDS
8. INTERNALLY ROUTED CABLES
9. DIRECT MOUNT FOR SHIMANO SIDE SWING FRONT DERAILLEUR
10. DEDICATED BOOST 12 X 148 DROPOUTS
8.
1. The SB6c delivers 6 inches (157mm) of travel with our patented
Switch Infinity Technology. Efficient pedaling performance while still
smooth and continuous when the going gets rough.
2. High modulus carbon provides a stiff, strong and light weight
chassis.
3. Oversized pivot pins help create a stiff interface between the
front and rear triangles of the frame. Custom Enduro Max sealed
bearings keep things moving freely at the pivots.
4. The ISCG 05' tab is built into your SB6c. The built in system is
lighter than a conventional tab and allows for a full myriad of chain-
guide options.
5. Using our inset head tube on the SB6c allows for a larger head tube
with more area, increased stiffness, and lower overall ride height
without compromising any performance.
6. The SB6c uses a 2.5 inch stroke, 8.5 inch eye to eye Float-X shock,
by Fox Racing Shox.
7. Custom chain-slap guards on the seat stay and chain stay keep
things quiet while riding and protect the frame.
8. The SB6c features internal cable routing for clean protected cables
and a very clean looking bike.
9. The SB6c has a removable front derailleur mound specifically
designed around the new Shimano side swing D-Type front
derailleur.
10. Dedicated Boost 12 x 148 dropouts for strength, stiffness and ease
of wheel installation.
9.