Advertisement
LONG REVERED FOR
IT'S IMPECCABLE TRAIL
MANNERS, THE 575
HAS BEEN COMPLETELY
UPDATED AND BUILT
AROUND A 27.5" WHEEL
PLATFORM.
1.
CUSTOM BUTTED HYDRO-FORMED 7005 ALLOY TUBE SET
2.
TAPERED INSET HEADTUBE (44MM/56MM)
3.
NEW REAR TRIANGLE WITH FULL CUSTOM BUTTED ALLOY TUBING
4.
INTERNAL CABLE ROUTING
5.
DOUBLE ROW BEARINGS ON SWING-ARM MAIN PIVOT
6.
DIRECT MOUNT FRONT DERAILLEUR ELIMINATES CLEARANCE ISSUES
7.
CABLE ROUTING FOR INTERNALL HEIGHT ADJUSTABLE SEAT POST
8.
ISCG 05 TABS FOR EASY INSTALLATION OF CHAIN GUIDE SYSTEMS
9.
PF-30 BOTTOM BRACKET FOR EXTRA STIFFNESS AND COMPATIBILITY
10.
DROPOUTS ALLOW FOR 135MM QR WHEEL OR 142MM X 12MM
8.
1.
Yeti's custom butted hydro-formed tube sets give our bikes the
stiffness and strength you have come to expect and the clean look
that everyone loves.
2.
The tapered inset head tube allows for the widest range of
compatibility and increases stiffness in the front end.
3.
Full butted alloy tubing for the best in strength and stiffness. This
bike tracks well and does not sacrafice in the weight department to
achieve that.
4.
Internal cable routing to keep the bike clean looking and to keep
the cables clean. Nobody likes gritty cables and nobody likes the
look of cables running all over your frame either.
5.
Double row bearings are used to increase bearing life and keep
everything running smooth.
6.
The use of a drirect mount (E-Type) front derailleur gives the 575
exceptional front shifting throughout the travel.
7.
The 575 has cable routing for internally routed height adjustible
seat posts. We all appreciate a clean looking bike.
8.
The 575's integrated ISCG 05 tabs alloy you to mount up any bash
guard or chain guide you could want.
9.
The PF-30 Bottom Bracket Shell gives the frame extra stiffness
without compromising weight or compatibility.
10. The Yeti chip system allows for an easy switch between a standard
135mm QR or the 142mm x 12mm Shimano thru-axle system.
9.
Advertisement
