Belkin OmniView F1DA104T User Manual page 21

USING YOUR PRO2
first active computer will be displayed on the Console monitor. Use the
direct-access port selectors to go to the desired computer on BANK 02.
The "BANK – " button will take you to the previous BANK. For example,
when you are at BANK 02 and want to check computers in BANK 01.
Pressing the "BANK – " button will take you to BANK 01. As default, the
first active computer will be displayed on the Console monitor. Use the
direct-access port selectors to go to the desired computer on BANK 01.
Keyboard Hot Key Commands:
Conveniently command the PRO2 to switch ports through simple keyboard
key sequences. To send commands to the PRO2, the "Scroll Lock" key must
be pressed twice within two seconds. You will hear a beep for confirmation.
Below is a complete list of hot key commands:
Note: you will have approximately five seconds to complete each
hot key sequence.
SL SL Up Arrow Switch to PREVIOUS ACTIVE port
SL SL Down Arrow Switch to NEXT ACTIVE port
SL SL Page Up Switch to PREVIOUS BANK
(By default, selects first active port on the
BANK)
SL SL Page Down Switch to NEXT BANK
(By default, selects first active port on the
BANK)
SL SL Y Directly switches to PORT Y on BANK 00
(Single-Switch Configuration) Y=01 to 16
SL SL X Y Directly switches to PORT Y on BANK X
(Daisy-Chain Configuration) (X=00 to 15) (Y=01 to 04 for F1DA104T)
(X=00 to 15) (Y=01 to 08 for F1DA108T)
(X=00 to 15) (Y=01 to 16 for F1DA116T)
SL SL Delete Reset On-Screen Display menu
SL SL S Disable sound in AutoScan mode
SL SL Space Bar Activate On-Screen Display
SL SL A Enable AutoScan mode
(Refer to AutoScan button)
19