Areas Of Application; Assembly; Setting Up - GEA SHA series Assembly Instructions Manual

3 | Areas of application

3.1 Areas of application
• The operating limits of the condensing units differ to the respective compressor.
The really operating limits can be found on the Internet on our software (VAP) under vap.gea.com.

4 | Assembly

INFO
D
?
GB

4.1 Setting up

F
E
8
- New compressors are factory-filled with inert gas (3 bar nitrogen).
Leave this service charge in the compressor for as long as pos-
sible and prevent the ingress of air.
-
Immediately after connecting the Plusbox to the refrigeration
system, close the shut-off valves in the suction, discharge lines
etc. and evacuate the compressor.
-
Check the condensingn unit for transport damage before starting
any work.
Do not lift manually
Use lifting gear
Transport preferably via forklift truck,
alternatively bolted to a pallet
Provide adequate clearance for maintenance work.
Distance from wall to condenser minimum 300 mm.
Do not use in a dusty, damp atmosphere or a combustible
environment.