Features & Specifications - YORKVILLE MP10DS Owner's Manual

8
All manuals and user guides at all-guides.com
FEATURES / SPECIFICATIONS
Balanced XLR inputs 6
Balanced ¼" inputs 10
Unbalanced RCA inputs 2 stereo pairs
Channel Equalization High, Mid, and Low
Channel Effects Send Control YES
Channel Effects Pre-Gain
Pan Controls 6 (Channels 1 – 6)
Main Out Stereo or Mono
Monitor Out YES
Amp In 2 (A & B)
Effects Send YES
Effects to Main YES
Effects to Monitor YES
Record Out Stereo
Main EQ 9 Band, graphic
MIXER SECTION (input to line out)
Input referred noise -122 dB
Max balanced input gain +56 dB
Balanced input impedance 1200 Ohms
Max balanced input gain
1/4" jacks +40 dB
Balanced input impedance
1/4" jacks 10k Ohms
Unbalanced input impedance
RCA 5k Ohms
Balanced CMRR min. 35dB, typical -50dB
Frequency response 36 dB gain +/-3 dB, 20 Hz to 20 KHz
Signal path distortion less than 0.1% 20Hz-20KHz
Channel Clip LED threshold 5 dB before clipping
Channel EQ adjustment range +/- 15 dB
Graphic EQ adjustment range +/- 12 dB
Phantom Power 24 VDC
AMPLIFIER
Frequency response +/-3 dB, 20 Hz to 20 KHz
Gain 24 dB
Input sensitivity 1.4 VRMS
Total Harmonic Distortion (<0.1%) 0.05% at 1KHz
Max power into 8 Ohms <1% THD 215 Watts (1 channel driven)
Max power into 8 Ohms <1% THD 170 Watts (2 channels driven)
Rated Load Power 160 Watts per channel (8-ohms)
typically 140 Watts per channel (4-ohms)
Signal to Noise Ratio 90db
Dimensions (D/W/H) 10" x 21" x 11.85"
Weight 38 lb. (17.5 kg.)
Power Requirements
120 VAC
230 VAC
MIXER
25cm x 55cm x 30cm
260VA 60 Hz
260VA 50 Hz
MICROMIX
MICROMIX