Introduction; Epowerswitch Features - Belkin ePowerSwitch F1D001 User Manual

The ePowerSwitch is a network-manageable, intelligent power
control unit designed to provide control of power for up to eight
electrical devices in Internet age.

ePowerSwitch Features

The ePowerSwitch System features:
Internet ready — Individually control each of eight
outlets using a web browser, telnet, or a terminal program
Remotely and individually reboot hung servers
If network hung, you can use telephone to control the
ePowerSwitch to shutdown or reboot locked up
devices or servers.
Sequentially apply power to equipment that is plugged
into the ePowerSwitch.
Multiple OS support—As long as there is Network
Management software present.
Remote setup support— Once an IP address is assigned,
the rest can be setup remotely through telnet commands.
Easy USB port setup—In addition to regular serial port
setup support, this adapter also has a USB setup feature
and is the preferred method for initial setup of this card.
(Requires Windows 98)
Remote Control—Turns each receptacle on/off when the
NMS sends the proper command.
NMSs To Receive Alarms—These traps (unsolicited
messages) inform you about the power condition of the
power outlets.

Introduction

1