Table of Contents
Advertisement
To load the paper:
1, From the front of the cardiograph, release the latch on
the left side and slide the paper door t o your left.
2. Remove the outer packaging on the paper. Keep the
cardboard backing on the bottom of the paper stack.
3. Place the paper stack in t h e compartment so that the
top side of t h e paper feeds grid side up over the top
panel. T h e paper sensing hole will be in t h e lower
corner of the paper, and t h e cardboard backing will
be on the bottom.
4. Pull a half sheet out and over t h e paper door. Make
sure that t h e paper is parallel with the sides of the
paper door. See Figure'B-5.
5. Slide the paper door back into place. The door is
latched when it snaps into place.
Setting
up Yaur Cardiograph for
the First Time B-9
Advertisement
Table of Contents
