Table of Contents
Advertisement
Figure 8-2.
Connecting the Patient Module Lead Wires and Data
Cable.
A, Patient Module Data Cable
B.
Lead Wires
C. Shorting plugs
Connect the lead wires t o the patient module by
matching colors and labels on the patient module and
the lead wires. The lead wires have colored labels on
the end nearest the electrode.
If you are using the patient module from the front of
the cardiograph, lead the patient module data cable
through the hooks underneath the cardiograph on the
cart. The cable will snap into the two small hooks.
Attach the patient module data cable t o the patient
module as shown in Figure
6-2.
Setting
up Your Cardiograph
for the
First
Time B-3
Advertisement
Table of Contents
